Query Terminal Voice Board for Hospital Information Point, WF-K8801, AndroidSBC, Warsaw

TL;DR: Query Terminal Voice Board for Hospital Information Point

AndroidSBC supply desk: LPDDR4X and eMMC allocations locked for the WF-K query board family serving Warsaw, Poland. The WF-K8801 self-service query terminal Android motherboard spans the AI face recognition self-service query terminal and eleven sister models in the WF-K series, all built on the RK3588 octa-core ARM Cortex-A76 2.4GHz plus Cortex-A55 64-bit SoC with the ARM Mali-G610 MP4 GPU, 4K HDMI plus dual LVDS independent display, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-K family from the Longgang source factory in Shenzhen to Warsaw and Poland importers who run hospital information points, bank branch lobbies, government service halls, mall directory stations, airport concourses and outdoor query cabinets.

About AndroidSBC and the Self-Service Query Terminal Android Motherboard Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen board maker that runs self-service query terminal Android motherboard production on its own Longgang lines. The WF-K series covers twelve models across eight silicon tiers, from the RK3588 flagship down to the entry A133 part, so a Warsaw buyer can size a query terminal project without changing suppliers halfway through. The factory ships to Poland on a factory-direct basis, with the driver SDK, compliance files and mounting drawings bundled into the same carton as the boards.

WF-K8801 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-K8801 (AI face recognition self-service query terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Poland importers sourcing the WF-K family, the WF-K8801-A variant is the typical configuration for the ID-verified self-service query deployment use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Self-Service Query Terminal Android Motherboards for Poland Buyers

The Warsaw market asks for query terminals that are simple to service, because a failed unit means a closed service station. That shifts the sourcing question towards board consistency and spare-part continuity in Poland.

Then comes documentation. A Warsaw importer needs the UKE evidence trail behind CE marking with UKE radio interface notification to clear customs in Poland without holding the shipment at Port of Gdansk for paperwork reasons. That is the backdrop for the Warsaw programme: a 133300-unit requirement placed on September 22, 2026 and routed through the Gdansk - Shanghai lane to keep the schedule honest.

Competitive Comparison: WF-K8801 vs Competing Self-Service Query Terminal Android Boards

The table below puts the WF-K self-service query terminal board against what a Warsaw integrator typically finds on competing query boards sold into Poland.

• Platform breadth: twelve models on eight chips (RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing driver stack or mounting pattern.
• Bundled integration: touch, printer, scanner, card reader, camera and voice driver SDK ships in the carton; competing query boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing query boards reaching {city}.

Global Self-Service Query Terminal / Information Kiosk Market Trends

The category is broadening from single-purpose lookup stations into multi-role information points. Poland operators now expect the AI face recognition self-service query terminal to drive a hall display as well, which is why Warsaw projects increasingly specify dual-screen configurations.

• Volume shift to board-level sourcing: more integrators now buy the motherboard rather than the finished kiosk, which is why the WF-K8801 and WF-K3399 tiers ship in board form with the enclosure left to the local partner.
• Dual-screen becomes the default: hall display plus touch query on one board is replacing two separate devices, and the WF-K3399 and WF-K1330 configurations address that pattern directly.
• Longer service life expectations: operators now plan five to seven years per query terminal, which favours a fixed BOM such as the WF-K1330 over boards that re-spin silicon between lots.

For Poland buyers, the market shift means the query terminal decision is now a multi-year supply decision, and Warsaw projects are increasingly evaluated on that basis.

Partner Success Story: Southern Cross Info Systems (medical centre technology group)

A Southern Cross Info Systems deployment in the Australia and New Zealand healthcare segment illustrates how the WF-K query board family supports Warsaw integrators. Southern Cross Info Systems deployed 133300 query terminals across medical centre entrances.

• OEM relationship: AndroidSBC private-label SKU shipped with Southern Cross Info Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive touch, thermal printer, receipt printer, document scanner, A4 printer, barcode scanner, QR code, NFC, RFID, card reader, ID reader, face recognition, voice module, speaker amplifier and microphone.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus UKE conformity, all bundled into the Shenzhen source-factory shipment.

Southern Cross Info Systems National Accounts Director for ANZ Healthcare noted: Southern Cross Info Systems bundled touch query stations and hall information boards into one tender, and the WF-K platform carried both roles across 133300 sites in Warsaw.

Field Report: AI face recognition query terminal rollout at a government service hall

SHENZHEN, September 22, 2026 - Hong Mei, AndroidSBC field desk. The WF-K8801 units were packed with the printer and scanner drivers pre-integrated, cutting the on-site configuration load for Poland teams. The WF-K8801 self-service query terminal Android motherboard order for Warsaw, Poland cleared the burn-in station on schedule and is en route via the Gdansk - Shanghai lane.

The WF-K8801 AI face recognition self-service query terminal production lot includes the WF-K8801-A variant as the typical configuration, with touch panel, thermal printer and document scanner driver SDK plus staged OTA management bundled into the source-factory shipment. For Poland integrators, the UKE conformity plus CE marking with UKE radio interface notification paperwork is bundled.

Filed by Hong Mei, AndroidSBC field desk, SHENZHEN. Polish clinics and telecom stores run query boards linked over RS232 to existing counter information displays.

WF-K8801 Application Scenarios

The WF-K8801 AI face recognition self-service query terminal sits inside a twelve-variant WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-K8801-A configuration is the typical build for the ID-verified self-service query deployment use case, with touch panel and identity peripheral driver SDK plus staged OTA management bundled.

• Hospital and clinic information points: the WF-K8801 drives a touch query station at the entrance while the hall display shows the same information set to waiting visitors in Warsaw.
• Bank and financial branch lobbies: touch query plus counter display from one board, with card reader and ID reader integrated for account and product lookups.
• Government service halls: the WF-K1331 runs tax, social security and real estate information lookup, with printing available on the same board.
• Shopping mall directories: the WF-K6180 serves mall directory and wayfinding lookup, with the advertising screen running an independent content loop.
• Airport and train station concourses: high-brightness information query where the WF-K5270 has to stay readable under strong ambient light.
• Retail and pharmacy price or product lookup: compact stations where the WF-K8800 fits a narrow counter without structural work.
• Outdoor and unheated information cabinets: the industrial tier holds the wide temperature window and 7x24 duty cycle for street-level query points.
• Multi-language public information points: on-screen lookup in more than one language from a single board, with voice assistance where the venue requires it.
• Retrofit programmes in Warsaw: the same board re-uses the existing enclosure, panel and mounting pattern so an installed estate can be upgraded board by board.

Partnership Models for Warsaw Buyers

The commercial menu for Warsaw integrators has three entries, and Poland partners usually start on one before adding the others as volumes grow.

• Distribution track: the partner buys the WF-K board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-K board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

In practice Poland partners start on the distribution track, add the integration track once volumes justify it, and move to private label when Warsaw brand recognition matters more than margin per unit.

Frequently Asked Questions

Does the WF-K self-service query terminal Android motherboard family support an AI face recognition self-service query terminal?

Answer: Yes, and it is qualified on the same production line as the rest of the family. The AI face recognition self-service query terminal runs on the WF-K baseline image that Poland buyers receive, so there is no separate integration project.

What is the real difference between the RK3588 tier and the other silicon tiers in the WF-K family?

Answer: The RK3588 tier sits at a specific point on the price-versus-headroom curve. Below it the boards suit single-screen information lookup; above it they support dual-screen independent display and heavier video work, and AndroidSBC documents that mapping for Warsaw buyers.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Poland?

Answer: Yes. Compliance files for Poland are bundled into the source-factory shipment to Warsaw, and AndroidSBC provides the underlying test reports as well as the certificates on request.

What are the MOQ and lead time for a first order of the WF-K self-service query terminal family?

Answer: The first order MOQ on the WF-K family is set for pilot runs rather than container loads. Warsaw buyers can start small, then scale once Poland field data is in hand, with 15-30 day bulk lead times.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-K family?

Answer: Yes. Custom ROM work on the WF-K family is scoped per Warsaw project rather than sold as a generic service, which keeps the Poland deliverable tied to a specific deployment.

How are software updates and long-term support handled on the WF-K family?

Answer: Software updates on the WF-K family are staged rather than immediate, with rollback available at each step, which matters when a Warsaw estate is live and Poland sites cannot tolerate an unplanned outage.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-K family?

Answer: Yes. AndroidSBC regularly ships the WF-K family into Poland fulfilment centres on behalf of Warsaw sellers, handling the labelling and carton marking at the source factory.

How are RMA and DOA replacements handled on the WF-K self-service query terminal family?

Answer: RMA and DOA units are handled against the production lot, since every WF-K board is logged against its firmware revision and burn-in result before it leaves Shenzhen. Warsaw partners report against the lot number and AndroidSBC matches it to the rig log.

Contact AndroidSBC: Start Your WF-K8801 Sourcing Conversation

To start a WF-K self-service query terminal Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, Warsaw integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Warsaw and Poland the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.