POS Board eDP Output for Restaurant Till, WF-P3602, AndroidSBC, Warsaw

TL;DR: POS Board eDP Output for Restaurant Till

AndroidSBC sourcing desk: dual-screen POS board pricing held flat through the current quarter serving Warsaw, Poland. The WF-P3602 POS Android motherboard spans the mobile handheld POS with 4G and barcode engine and eleven sister models in the WF-P series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, MIPI DSI output at 720p, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Warsaw and Poland importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group, and it builds the twelve-model WF-P POS Android motherboard family at the Longgang source factory in Shenzhen. The line spans entry single-screen counters through AI face payment terminals and industrial outdoor payment cabinets, so a Warsaw integrator can qualify one board family and then move between tiers without re-writing the peripheral layer or re-cutting the enclosure. Peripheral validation happens on the Longgang bench with the actual printer, scanner and drawer models the Warsaw integrator intends to use, and the result is written into the shipment file rather than left to the integrator to discover on site.

WF-P3602 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3602 (mobile handheld POS with 4G and barcode engine) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Poland importers sourcing the WF-P family, the WF-P3602-A variant is the typical configuration for the tableside ordering handheld rollout use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for Poland Buyers

The thermal problem is underrated. A sealed all-in-one terminal with no fan has to hold a 7x24 counter duty cycle in a Poland summer, and boards that pass a bench test at 25C start throttling behind a shop window.

The thermal question is handled at the board level rather than in the enclosure. The WF-P tier chosen for Warsaw is specified for fanless 7x24 counter duty with a hardware watchdog and a scheduled power cycle, and the burn-in record that accompanies the lot is run at the top of the temperature window rather than at 25C. For the Warsaw programme the milestone landed on September 23, 2026: 43300 boards shipped on the Gdansk - Shanghai lane, seven-year firmware window committed on the whole WF-P family.

Competitive Comparison: WF-P3602 vs Competing POS Android Boards

Four differences decide whether a Poland POS rollout survives its second year, and they are all visible before the first lane goes live.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

The Poland picture follows the global pattern: cashless adoption sets the demand, and the replacement of legacy registers sets the volume. A Warsaw integrator who can offer a board that drops into an existing enclosure wins on installation cost as much as on unit price.

• Entry counter tier: WF-P3602 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P7601 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P7602 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

The eight-tier WF-P line exists because Warsaw rollouts are not uniform. One chain will use four of the twelve models, and the point is that all four share one driver contract.

Partner Success Story: Southern Cross Lane Systems (supermarket and fuel forecourt integrator)

The Southern Cross Lane Systems case in the Australia and New Zealand retail segment is a working example of how the WF-P family from AndroidSBC supports Warsaw integrators. Southern Cross Lane Systems deployed 43300 WF-P boards across 61 supermarket lanes and forecourt cabinets.

• OEM relationship: AndroidSBC private-label SKU shipped with Southern Cross Lane Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus UKE conformity, all bundled into the Shenzhen source-factory shipment.

Southern Cross Lane Systems Technical Lead for Australia and New Zealand Retail noted: Southern Cross Lane Systems takes the wide-temperature WF-P tier for forecourt cabinets and the standard tier for store lanes, with 43300 boards across the Warsaw network.

Field Report: tableside ordering handheld rollout at a casual dining group

SHENZHEN, September 23, 2026 - Liang Shu, AndroidSBC field desk. Each WF-P3602 board in the Poland lot carries a serial number logged against its test record, and the peripheral validation report references those serials. The WF-P3602 POS Android motherboard order for Warsaw, Poland cleared the burn-in station on schedule and is en route via the Gdansk - Shanghai lane.

The WF-P3602 mobile handheld POS with 4G and barcode engine production lot includes the WF-P3602-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Poland integrators, the UKE conformity plus CE marking with UKE radio interface notification paperwork is bundled.

Filed by Liang Shu, AndroidSBC field desk, SHENZHEN. Polish discount chains run the board with a fiscal printer over RS232 and ask for Polish diacritics support in the receipt font set.

WF-P3602 Application Scenarios

The WF-P3602 mobile handheld POS with 4G and barcode engine sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3602-A configuration is the typical build for the tableside ordering handheld rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P3602 drives the cashier screen while the second lane carries the customer display or the promotion wall in Warsaw.
• Convenience and small format stores: the WF-P3288 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P3399 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P1330 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P6180 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Warsaw: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Warsaw Buyers

For Poland importers the track choice changes the paperwork, not the board. The three options below are the standard ones.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

AndroidSBC is recruiting local partners in Poland on all three tracks, and the qualification evidence needed to start is the same in each case.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a mobile handheld POS with 4G and barcode engine?

Answer: It is. The WF-P family was specified around mobile handheld POS with 4G and barcode engine, and every board in the family is validated on that use case before it leaves the Longgang factory.

Which silicon tiers are available in the WF-P family for Poland buyers?

Answer: The WF-P family spans RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. For Poland buyers the choice is driven by counter throughput and by whether the lane needs an NPU.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: Yes - that is the standard counter configuration. The printer runs on RS232 or USB, the scanner on USB, and the drawer fires from the RJ11 header, all validated together before the lot ships.

What is the minimum order quantity and the sample lead time for Poland?

Answer: AndroidSBC takes single-board sample orders with a 1-3 day lead, then a 15-30 day mass-production lead on bulk orders. The MOQ for private-label work is agreed per SKU.

Is custom ROM, boot logo or pre-installed app development available?

Answer: AndroidSBC supports custom Android AOSP builds, Linux BSP porting, boot logo and animation work, pre-installed apps and custom UI, and locks the result as the production image.

How are firmware updates delivered to a Poland estate after deployment?

Answer: AndroidSBC ships staged OTA with rollback as a bundled tool, so a Poland estate of several hundred lanes can be updated in waves rather than all at once.

What shipping terms does AndroidSBC support for Poland orders?

Answer: AndroidSBC supports FOB Shenzhen, CIF and EXW pricing, and books the shipping lane against a production slot so the Warsaw delivery date holds.

What happens if a board fails in the field in Poland?

Answer: Each board carries a serial number logged against its burn-in record, so a field failure in Poland is traced to its production lot, and the replacement ships from the same frozen BOM.

Contact AndroidSBC: Start Your WF-P3602 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-P POS board family. Warsaw integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Warsaw and Poland the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.